Teledyne LeCroy UWBTracer User Manual - Manual (Page 134)

Chapter 9: Reports UWBTracer/Trainer User Manual
116
LeCroy Corporation
Using the Display to Navigate Within the Trace File
You can use the Traffic Summary window to navigate to a specific frame or packet in the
trace file. For example, suppose you want to go to the second WiMedia Frame.
To navigate:
Step 1 With the trace file open, select Traffic Summary from the Report menu
(or click the Traffic Summary button on the Main tool bar). The Traffic
Summary window appears.
Step 2 Select WiMedia Frames in the left pane of the Traffic Summary window.
The summary for WiMedia Frames appears in the right pane.
Step 3 Click the count in the total column for Data frames (Figure 9.15).
Figure 9.15 Selecting the Row for Data Frames
Step 4 The Go box becomes active at the top of the right pane (Figure 9.15). By
default, it is set at the first Data frame, shown at the top in the trace.
Step 5 In the Go box, enter 2 to indicate that you want to go to the second Data
frame in the trace (Figure 9.16).
Figure 9.16 Set Go Box to Second MPI Data Frame
The trace display adjusts so that the second Data frame appears at the top of the display.