Teledyne LeCroy UWBTracer User Manual - Manual (Page 198)

Chapter 12: Recording Options UWBTracer/Trainer User Manual
180
LeCroy Corporation
Options
The options checkboxes appear on the upper right side of the Recording Options
window:
• Beep When Trigger Occurs: Makes the computer connected to the UWB-
Tracer/Trainer beep three times when a Trigger condition is first detected.
• Save External Interface Signals: Records signals from data pins on the breakout
board.
• External Trigger Input: Allow triggers from the trigger cable.
Misc Button
To generate an additional binary file at the end of recording:
Step 1 Select the Misc button to display the General: Miscellaneous dialog
box.
Step 2 Select the Store into Raw Data Debug File checkbox.
The file is stored in the , as described in “Directory Structure on
Windows XP and Vista” on page 47. The file name is BusEngineRawTracexxxx.dat,
where xxxx is the serial number of the analyzer. Use the file to provide additional
information if you want to report a problem to LeCroy Technical Support.
Warning! :The Raw Data Debug binary file can have a very large size.