Teledyne LeCroy UWBTracer User Manual - Manual (Page 211)

UWBTracer/Trainer User Manual Chapter 12: Recording Options
LeCroy Corporation
193
Recording Rules Toolbar
The Recording Rules toolbar (Figure 12.9) buttons (Table 12.1 ) control the Recording
Rules page.
Figure 12.9 Recording Rules Toolbar
Table 12.1 Recording Rules Buttons
Note: If you have a wheel on the mouse, you can zoom by holding down the CTRL
key and rolling the mouse wheel.
New Event. Creates a new
event in the Available
Events area. Zoom Out. Makes the
display appear
smaller.
Delete Event. Deletes the
selected event. Show/Hide Channels.
Shows or hides the
channel icon on the
Event button.
Undo. Undoes the change
made to Recording Rules
page. The Undo buffer
has unlimited size. Show/Hide Properties
Dialog. Shows or
hides the properties
dialog of the selected
event, action, or state.
Redo. Restores changes
done to the Recording
Rules page. This display appears
when the current
Recording Rules
configuration can be
executed by the
hardware.
Zoom In. Enlarges the
display (see note). There
are five zoom levels. The
default level is the middle
one. This display appears
when the current
Recording Rules
configuration cannot
be executed by the
hardware.
Apply Recording Rules to
MPI Recording Channel Apply Recording
Rules to RF Recording
Channel