Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 60)

Teledyne LeCroy Protocol Errors
58 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Figure 2.19: SATA: FIS Patterns Dialog
SAS vs. SATA: Not available in SATA.
Choose a FIS Type from the drop‐down list and click OK. Repeat for additional types.
Available FIS Types
 Register Host to Device
 Register Device to Host
 Set Device Bits
 DMA Activate
 DMA Setup
 BIST
 PIO Setup
 Data
 Vendor
Address Frame (SAS only)
Double‐click Address Frame to open the Address Frame Type Pattern dialog (see
Figure 2.20 on page 59 ).