Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 129)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 127
Analysis Teledyne LeCroy
Figure 3.24: Report between Cursors
Report between Events
Click the option button next to the From the event selection dropdown list, click the From
down arrow to choose the 1st event, then enter the number of its occurrence. Next click
the To down arrow to choose the 2nd event, then enter the number of its occurrence.
Figure 3.25: SATA: Report between Events
Click OK. The resulting report are limited to the capture between the defined events.
SAS vs. SATA: SAS adds Transport, SCSI Cmd, SMP Cmd, and Task Mng to the drop‐down
list and deletes FIS and Phy Reset.
Statistical Report Content
SAS: A complete SAS statistical report consists of the following reports, accessed by
clicking the corresponding tab in the dialog:
 General
 Bus Condition
 Primitive
 SSP Transport
 SMP Transport
 STP Transport
 ATA Command
 SCSI Command
 SMP Command
 Task Command
 SAS Address
 Read/Write Command
 Protocol Error
 Performance
 Lanes
 Others
SATA: A complete SATA statistical report consists of the following reports, accessed by
clicking the corresponding tab in the dialog: