Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 234)

Teledyne LeCroy Interface
232 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
 Save a copy of the library as.
 View/edit a selected item.
 Insert a copy.
 Delete a selected scenario.
 Copy
 Paste
4.2.5 Device Ports
If a device is connected, the software displays the Device Ports.
Figure 4.4: Device Ports
Using the first row of icons, you can Run/Stop All Ports or Run/Stop individual ports.
The columns display the Port, Function/Configuration, Library, and Scenario.
You can Float, Dock, Auto‐Hide, or Hide the window.
Note: A port row is grayed‐out when that port has not been configured to be a Jammer in the
Port Configuration dialog (see “Port Configuration for InFusion” on page 233 ).
4.2.6 Using the Device Ports Dialog
After you have finished Port Configuration (see “Port Configuration for InFusion” on
page 233 ), you use the Device Ports dialog to assign specific scenarios to ports, so that
different scenarios can run on different ports.
To assign a scenario to a port, drag and drop the scenario from any library window to the
port. The Device Ports dialog then displays the Library and Scenario on the row for that
Port/Configuration.