Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 30)

Teledyne LeCroy Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars
28 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Figure 1.18: File Menu Option
1.11.2 Setup
For special work, you can use the Setup menu (see Figure 1.19 on page 29 ) to perform
the following actions:
 Configure TxRxVout & Pre‐emphasis (see “TxRx Vout & Preemphasis” on
page 198 )
 User Defined Decoding (see “User‐Defined Decoding” on page 212 )
 External Trig Setting (see “External Trig Setting” on page 209 )
 Update Device (see “Update Device” on page 210 )
 All Connected Devices (see “Select Device” on page 20 )
 Find DUT (see “Find DUT” on page 223 )
 Power Source Control (see “Power Source Control” on page 226 )
 Manage Setup Licences (see “Floating License” on page 209 )
 Set Preferences (see “Preferences” on page 200 )
 Perform a Self Test (see “Self Test” on page 215 )
 Create a Data Block (see “Creating a Data Block” on page 106 )
 Set Port Alias (see “Set Port Alias” on page 196 )
 Set SAS Address Alias (see “SAS Address Alias (SAS only)” on page 197 )