Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 111)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 109
Counter Teledyne LeCroy
Address
The cell address starts at 0 for the first data entry and automatically increments to the
next available address. You can set it to a previously defined address to modify its content
or insert additional data.
Insert/Overwrite Data
To define whether to overwrite data in a previously defined cell or insert new data after
that cell, toggle the Insert/Overwrite button.
Save
When you have completed a data block definition, click the Save button to save the newly
created data block.
2.19 Counter
To use a counter as data, click the Counter button, enter a Starting Number for the
counter and the data address to count to, and click OK.
Figure 2.85: Set Counter as Data