Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 18)

Teledyne LeCroy Analyzer Features
16 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
 Fr/OOB OOB (Out of Bound) or Frames (traffic) (green)
Before the link, illuminates during
the OOB sequence. 
After the link, indicates traffic on
the bus.
Figure 1.2: Front Panel
1.5.2 Rear Panel
From left to right, the Analyzer has the following on the back:
 USB Port for host connectivity
 External Trigger IN/OUT and Sync Expansion Port
 Gigabit Ethernet Port for network connectivity
 DC Power
 Power Switch (0/1)
Figure 1.3: Rear Panel
WARNING: Do not open the enclosure. No operator serviceable parts are inside.
1.5.3 Temperature and Humidity
The hardware should operate flawlessly in the following temperatures range:
 Operating 0 °C to 55 °C (32 °F to 131 °F)
 Non‐Operating ‐20 °C to 80 °C (‐4 °F to 176 °F)
The hardware should operate in the following humidity range:
 10% to 90% RH (non‐condensing)