Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual User Manual

Page 103

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual

101

Advanced Mode (User‐Defined)

Teledyne LeCroy

1. Click the Add Pattern button

for a Pattern field and choose a trigger condition

from the drop‐down list.

Figure 2.73: SAS: Choosing a Trigger Condition

2. Define each selected pattern in the same way as in Easy Mode, as described starting

. To use a timer, define it first.

Note:

You can set a timer for any If or Else If condition.

3. Enter a value for the number of occurrences before trigger in the Cont field, up to a

maximum of 65535 occurrences.

4. Choose a capture option: Everything, Nothing, or Pattern.