Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 194)

Teledyne LeCroy Display Configuration
192 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
3.11 Display Configuration
The Analyzer ships with a default display configuration of field and viewer settings. You
can define your own field and viewer settings for a particular testing scenario. Right‐click
in the Packet View and select Preferences or select Setup>Preferences>Trace
Viewer>Configuration. Select the Trace Viewer tab and click Configuration to display the
Trace Viewer Configuration dialog (see
Figure 3.118 on page 193 )
3.11.1 Trace Viewer Configuration
The Trace Viewer Configuration dialog allows you to change the following display settings
(see
Figure 3.118 on page 193 ):
 Field Setting
 Format (Decimal, Hexadecimal, Binary)
 Visible
 Byte Order (Right Align, Left Align)
 Field Header Setting
 Text (color)
 Name
 Abbreviation
 Foreground (color)
 Viewer Setting
 Wrap Packet
 Enable Tooltips
 Data Payload
 Columns in Row (1, 2, 4, 8, 16)
 Bytes in Column (1, 2, 4, 8, 16)
 Time Stamp Origin: Absolute, Trigger, User Defined, Based on System Time
 Same color for start time and port
 Enable Packet View Condense Mode
 Time Stamp Format (LeCroy, Milli, Micro)
 Save Trace Viewer Configuration in a file
 Load Trace Viewer Configuration from a file
 Factory Setting (restores default settings)
 Font (opens Font dialog)