Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 17)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 15
Receiving Your Analyzer Teledyne LeCroy
1.3 Receiving Your Analyzer
The analyzer package includes the following components:
 1 Sierra M6‐1 Analyzer identified in the packing list
 1 USB A‐B 2.0 cable, 1.8 meter
 1 Ethernet cable, 10 feet
 2 SATA cables, 0.5 meter
 2 SATA cables, 0.15 meter
 1 Sync cable, 10‐pin, 6 inch
 1 DC power pack and cord
 1 Installation CD ROM with software and documentation
 1 Sierra M6‐1 Quick Start manual
1.4 Unpacking the Analyzer
Inspect the shipping container for any damage. Unpack the container and account for
each of the system components listed on the accompanying packing list. Visually inspect
each component for any damage. In the event of damage, notify the shipper and
Teledyne LeCroy Corporation. Retain all shipping materials for shipper’s inspection.
1.5 Analyzer Features
1.5.1 Front Panel
The Analyzer has the following features on the front:
 Power Indicator LED (green)
 Status LED (blue)
 Host SATA Connector
 Device SATA Connector
 LED Indicators for Host and Device
 Trig trigger (blue)
 Error error (red)
 Link link (orange)
 Spd speed level (yellow)
Speed Host Device
1.5G Off Off
3.0G On Off
6.0G On On