Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 280)

Teledyne LeCroy Scenario Batch Files
278 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
2. Select appropriate parameters for the command and click OK to display the script in
the Script Workspace.
Note: You can select ports from the port list, depending on number of ports licensed.
Note: The hardware Serial Number can already exist or not. If the Serial Number exists, the Serial
Number (for example, S/N: 12871) is shown. In Offline and Simulation mode, you can enter a
Serial Number. In Online mode, you can only enter an existing Serial Number.
3. To add another command, click Click here to add another script command.
To copy a script command, right‐click on the command and select Copy. 
Right‐click Click here to add another script command and then select Paste.
You can also cut, delete, and edit a selected script command.
4. To edit batch commands, click the command, or right‐click the command and select
Edit from popup menu.
5. To delete a command, right‐click and select Delete from popup menu, or select
command and press Delete key on keyboard.
6. After finishing, if everything is correct, push the Run Batch button to execute
scenario and save result in the log file.