Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 288)

Teledyne LeCroy Comment format
286 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
5.2 Comment format
/*Comment text*/
5.3 Primitive definition format
To add an ALIGN primitive, use ALIGN or 27.3 10.2 10.2 K28.5
To add a CONT primitive, use CONT or 25.4 25.4 10.5 K28.3
5.4 Loop definition format
You may write a defined pattern into memory repeatedly by enabling a loop.
Loop definition allows either “Enable” or Disable”. To enable looping use: Loop=Enable
5.5 Scramble definition format
Scramble definition allows either “Enable” or Disable”. To enable scramble use:
Scramble=Enable
5.6 Role definition format
To specify SATA hardware role: Role=Host or Role=Device
5.7 END_OF_FILE definition
A pattern generator file must include END_OF_FILE as the last statement in the file.
5.8 Example Pattern Generator File
Figure A‐1 illustrates a typical Pattern Generator file.