Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 53)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 51
Patterns and Data Capture Setup Teledyne LeCroy
5. After the project runs, you see an analyzer trace capture display similar to the one
shown in Figure 2.12.
Figure 2.12: SAS: Analyzer Trace Capture Display
For details about the results display, see “Display Manipulation” on page 113 and see
“Display Configuration” on page 192 .
2.11 Patterns and Data Capture Setup
You can refine data capture by choosing Pattern and then selecting specific patterns for
capture. Additionally, you can define a different set of patterns to capture after trigger.
To define specific patterns for capture, click the Pattern button to display the Capture tab
for Pattern (see
Figure 2.13 on page 52 ).