beautypg.com

Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual User Manual

Page 246

background image

Teledyne LeCroy

Scenario Events

244

 

 

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual

TABLE 4.2: Events

The following sections provide some additional details about three of the above events.

Event

Description

Address Frame

Occurrence of a specified address frame.

Analyzer Trigger

Trigger on Analyzer when its event matches. You can see the 
trigger on the Status Bar, but the Port Status dialog does not 
display any mark in the Trigger column. 
Note: This is different than the external trigger mechanism. You 
do not need an external trigger cable.
Note: When the analyzer triggers, it triggers on a packet before 
the actual trigger event occurs. The trace triggers more than 1us 
before the event actually occurs. The trigger is on the Initator side 
instead of the Target side as set in the scenario. 

Any DWORD

Occurrence of any DWORD.

ATA Command

Occurrence of a particular ATA command.

ATA Command Frame

Occurrence of a particular ATA command frame.

[+] ATAPI

Occurrence of a particular ATAPI command from the list:
MMC4, RBC, SBC2, SMC2, SPC2, SPC3, or SSC2.

Both Links Up

Occurrence of both line ports active (not idling).

CRC Error

Occurrence of a CRC error.

DWORD Matcher

Occurrence of a particular DWORD.

FIS Frame

Occurrence of a particular FIS frame.

FIS Type

Occurrence of a particular SATA FIS type.

Frame Type

Occurrence of a particular frame type.

Invalid 10bit‐code Error

Occurrence of an invalid 10b code.

Links Speed 3G

Both lines operating at 3 Gbps.

Links Speed 6G

Both lines operating at 6 Gbps.

OOB Signal

Occurrence of OOB signal.

[+] Primitives

Occurrence of Primitive Group, SAS Primitive, or SATA Primitive.

Running Disparity Error

Occurrence of Running Disparity (RD) error.

SAS Data Pattern

Occurrence of a particular data pattern in a SAS frame.

SATA Data Pattern

Occurrence of a particular data pattern in a SATA frame.

{+} SCSI

Occurrence of a particular SCSI command from the list:
MMC4, RBC, SBC2, SMC2, SPC2, SPC3, or SSC2.

SMP Frame

Occurrence of a particular SMP frame.

SNW

Occurrence of Final SNW, SNW1, SNW2, SNW3, Train SNW

SSP Frame

Occurrence of a particular SSP frame.

Timer

Occurrence of a particular elapsed time (time period).

Trigger Input

Occurrence of input trigger.