Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 262)

Teledyne LeCroy Example 5: Multiple Actions on a Single Event
260 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
4.13 Example 5: Multiple Actions on a Single Event
In this example, an event triggers a set of actions. The actions occur at the same time.
The device waits for an ACK from the initiator. When it occurs, the device beeps, injects
an RD error, and increments a counter monitoring for that event (ACK from initiator).
1. Click the New Scenario button in the main library or one of the device libraries. In
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
2. As in previous examples, configure the first event and its response in the Global
Rules area. Choose ACK primitive as the event and Beep as the action. From the
Action Properties drop‐down menu, enter 500 ms as the duration of the beep.
3. Click the add another action prompt to add a second action.
Figure 4.28: Example 5: Entering the Second Action
The Action Properties dialog box appears.
4. Choose Inject RD Error as the second action.
5. Click the add another action prompt to add a third action.
6. The Action Properties dialog box appears.
7. Choose Monitor/Count as the third action.