Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 181)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 179
Packet View Toolbar Teledyne LeCroy
3.5.9 Show/Hide Ports
You can Show/Hide a Single Port or you can Show/Hide Multiple Ports. To do so click on
the Ch Down Arrow.
Single Port
If Single Port is selected, you can click on one port button at a time to show/hide the
capture for that port. Show/Hide Single Port is time consuming as it shows or hides one
port at a time.
Multiple Ports
If Multiple Ports is selected, you can click on multiple ports to show or hide them. This
mode is much faster. Click on multiple ports to show or hide them.
Figure 3.96: SAS: Show/Hide Ports Toolbar
.
Figure 3.97: SATA: Show/Hide Ports Toolbar
You can also show or hide a port by right‐clicking a Port ID in Text View or Column View
and choosing Show or Hide (see
Figure 3.101 on page 183 ).
3.6 Packet View Toolbar
The Packet View toolbar allows wrapping, zooming, and configuration.
The Wrap Packets button on the Viewer Toolbar wraps the packet data in the
display to eliminate the need for horizontal scrolling.
Go to CATC Navigation View. Click this button to change the trace display to a
CATC Trace™. 
You can change the colors, fonts, and so on, in the Trace Viewer Configuration
(see
“Set Port Alias” on page 196 ).