Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 188)

Teledyne LeCroy Packet View Toolbar
186 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Byte Order
You can change the byte order in fields marked by an arrow and other fields.
Right‐click in the field, select Byte Order, and choose the ordering.
Figure 3.109: Byte Order
Note:
A blue arrow in the byte order field indicates that it has been changed.
Choose Data Format
You can display data values either in hexadecimal (default) or binary. To choose data
format, right‐click the mouse over a data field, and choose Format and the format.
Figure 3.110: Format