Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 155)

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual 153
Running Verification Script Engine (VSE) Teledyne LeCroy
3.4 Running Verification Script Engine (VSE)
You can perform custom post‐process analysis of the open trace by running a verification
script over the trace. A verification script instructs the application to send trace and
analysis information to the script. A verification script also contains script code, written
using CATC Script Language (CSL) (see the CSL_RefManual.pdf document in the docs
directory of the installation), used to process trace data and output that data in different
formats.
Note: You may write your own verification scripts to perform custom verification and analysis. For
information on how to write a verification script, see the Verification Script Engine Reference
Manual.
To run a verification script over a trace:
1. Select the main menu item Analysis > VSE or click the Running verification scripts
button on the main tool bar. The Run Verification Scripts dialog opens, from
which you choose and then run one or several verification scripts:
Figure 3.70: Run Verification Scripts Dialog
To expand the Log window, click the Expand Log button. The Log window fills the whole
window. To see the Verification Scripts window again, click the Collapse Log button.
To save output, click the Save Output button.