6 main fpga check (sata only) – Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual User Manual

Page 222

Text mode
Original mode

Teledyne LeCroy

Setup Menu

220

Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual

3.21.6

Main FPGA Check (SATA only)

To perform an Inter‐FPGA Connection check, select the Main FPGA tab.

Figure 3.146: Self Test Dialog Main FPGA Tab

Choose the Inter‐FPGA Connection test and click the Start Main FPGA Check button.
After a short time, the Test Result appears to the right of the selected line.