Teledyne LeCroy Sierra M6-1 SAS_SATA Protocol Analyzer User Manual - Manual (Page 272)

Teledyne LeCroy Example 8: Creating a Sequence With Many States #1
270 Sierra M6‐1 SAS/SATA Protocol Analyzer User Manual
Note: The states in this sequence have been renamed (do not have their default names). The following
table summarizes the sequence logic.
TABLE 4.10: Example 8: Logic of Sequence 0
1. Click the New Scenario button in the main library or one of the device libraries. In
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
2. As in previous examples, create the five states for this sequence.
3. In the File menu, select Save Scenario to save the scenario (see
Figure 4.39 on
page 271 ).
State Description
Wait for Align (0) When an Align (0) is received, go to Wait for Align (1).
Wait for Align (1) If an Align (1) is received next, go to Wait for Align (2);
otherwise, go to Indicate Error.
Wait for Align (2) If an Align (2) is received next, go to Wait for Align (3);
otherwise, go to Indicate Error.
Wait for Align (3) If an Align (3) is received next, restart test;
otherwise go to Indicate Error.
Indicate Error Indicate error and restart test.