ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 92)

HomeSafe User’s Guide
Wireless Configuration and Roaming 6-7
Figure 6-7 WLAN : Roaming
The following table describes the labels in this screen.
Table 6-2 WLAN : Roaming
LABEL DESCRIPTION
Active Select Yes from the drop-down list box to enable roaming on the HomeSafe if you have
two or more HomeSafes on the same subnet.
)
All APs on the same subnet and the
wireless stations must have the same ESSID to
allow roaming.
Port Enter the port number to communicate roaming information between APs. The port
number must be the same on all APs. The default is 3517. Make sure this port is not
used by other services.
Apply Click Apply to save your changes back to the HomeSafe.
Reset Click Reset to reload the previous configuration for this screen.