ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 41)

HomeSafe User’s Guide
2-8 Introducing the Web Configurator
Table 2-8 Wizard Step 3 : Internet Access Static IP Address Setup
LABEL DESCRIPTION
Internet Access Setup
My WAN IP Address
Enter your WAN IP address in this field.
My WAN IP Subnet
Mask
Type your network's IP subnet Mask.
Gateway IP Address Enter the gateway IP address (if your ISP gave you one) in this field.
DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The HomeSafe uses a system DNS server (in the order you specify
here) to resolve domain names for VPN, DDNS and the time server.
First DNS Server
Second DNS Server
Third DNS Server
Select From ISP if your ISP dynamically assigns DNS server information (and
the HomeSafe's WAN IP address). The field to the right displays the (read-
only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a system DNS server, you must use IP addresses when configuring
VPN, DDNS and the time server.
Back Click Back to return to the previous screen.
Next Click Next to continue.
2.5.4 Step 3 : Internet Configuration Setup Complete
Click Continue to complete the wizard Internet setup and proceed to the parental control wizard.
Figure 2-10 Wizard Step 3 : Internet Setup Complete
2.6 Step 4 : Parental Control Wizard
The main parental control screen allows you to restrict or not restrict access to the Internet.