ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 74)

HomeSafe User’s Guide
System Screens 4-3
Figure 4-2 SYSTEM : DDNS
The following table describes the labels in this screen.
Table 4-2 SYSTEM : DDNS
LABEL DESCRIPTION
Enable DDNS Select this check box to use dynamic DNS.
Service Provider Select the name of your Dynamic DNS service provider.
DDNS Type Select the type of service that you are registered for from your Dynamic DNS
service provider.
Host Names 1~3 Enter the host names in the three fields provided. You can specify up to two
host names in each field separated by a comma (",").
User Name Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard
Option Select the check box to enable DynDNS Wildcard.
Enable off line option
(Only applies to
custom DNS) This option is available when CustomDNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a
URL (that you can specify) while you are off line.
IP Address Update Policy:
Use WAN IP Address Select this option to update the IP address of the host name(s) to the WAN IP
address of the HomeSafe.
DDNS server auto
detect IP Address
Select this option to update the IP address of the host name(s) automatically by
the DDNS server. It is recommended that you select this option.
User specified IP
Address
Select this option to update the IP address of the host name(s) to the IP address
specified below. Use this option if you have a static IP address.
IP Addr Enter the IP address if you select the User Specify option.