ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 205)

HomeSafe User’s Guide
Maintenance 16-5
Table 16-5 Maintenance : Association List
LABEL DESCRIPTION
Association Time This field displays the time a wireless station first associated with the HomeSafe.
Refresh Click Refresh to redisplay the current screen.
16.6 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
"*.bin" extension, e.g., "HomeSafe.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot. See
the Firmware and Configuration File Maintenance chapter for upgrading firmware using
FTP/TFTP commands.
Click MAINTENANCE, and then the F/W Upload tab. Follow the instructions in this screen to
upload firmware to your HomeSafe.
Figure 16-6 Maintenance : Firmware Upload
The following table describes the labels in this screen.
Table 16-6 Maintenance : Firmware Upload
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
)
Do not turn off the HomeSafe while firmware upload is in
progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
HomeSafe again.