ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 282)

HomeSafe User’s Guide
System Security 29-1
Chapter 29
System Security
This chapter describes how to configure the system security on the HomeSafe.
29.1 System Security
You can configure the system password, an external RADIUS server and 802.1x in this menu.
29.1.1 System Password
Figure 29-1 Menu 23 System Security
You should change the default password. If you forget your password you have to restore the
default configuration file. Refer to the section on changing the system password in the
Introducing the SMT chapter and the section on resetting the HomeSafe in the Introducing the
Web Configurator chapter.
29.1.2 Configuring External RADIUS Server
Enter 23 in the main menu to display Menu 23 – System Security.
Figure 29-2 Menu 23 System Security
From Menu 23- System Security, enter 2 to display Menu 23.2 - System Security-RADIUS
Server as shown next.
Figure 29-3 Menu 23.2 System Security : RADIUS Server
The following table describes the fields in this screen.
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= 10.11.12.13
Port #= 1812
Shared Secret= ********
Accounting Server:
Active= No
Server Address= 10.11.12.13
Port #= 1813
Shared Secret= ********
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1x
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1x