ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 215)

HomeSafe User’s Guide
17-4 Introducing the SMT
Table 17-2 Main Menu Summary
# MENU TITLE DESCRIPTION
14 Dial-in User Setup Use this menu to set up local user profiles on the HomeSafe.
15 NAT Setup Use this menu to specify inside servers when NAT is enabled.
21 Filter and Firewall Setup Use this menu to configure filters, activate/deactivate the firewall and
view the firewall log.
22 SNMP Configuration Use this menu to set up SNMP related parameters.
23 System Security Use this menu to change your password.
24 System Maintenance This menu provides system status, diagnostics, software upload, etc.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this to exit from SMT and return to a blank screen.
17.3 Changing the System Password
Change the HomeSafe default password by following the steps shown next.
Step 1. Enter 23 in the main menu to display Menu 23 - System Security as shown next.
Step 1. Enter 23.1 in the main menu to display Menu 23.1 - System Security - Change Password.
Step 3. Type your existing system password in the Old Password field, for example “1234”,
and press [ENTER].
Figure 17-4 Menu 23 System Password
Step 4. Type your new system password in the New Password field (up to 30 characters), and
press [ENTER].
Step 5. Re-type your new system password in the Retype to confirm field for confirmation
and press [ENTER].
Note that as you type a password, the screen displays an “*” for each character you type.
Menu 23.1 - System Security - Change Password
Old Password= ?
New Password= ?
Retype to confirm= ?
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1x