ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 288)

HomeSafe User’s Guide
System Information and Diagnosis 30-3
30.2 System Information
To get to the System Information:
Step 1. Enter 24 to display Menu 24 — System Information and Console Port Speed.
Step 2. Enter 2 to display Menu 24.2 — System Information.
Step 3. From this menu you have two choices as shown in the next figure:
Figure 30-3 Menu 24.2 System Information and Console Port Speed
30.2.1 System Information
Enter 1 in menu 24.2 to display the screen shown next.
Figure 30-4 Menu 24.2.1 System Maintenance : Information
The following table describes the fields in this menu.
Table 30-2 Menu 24.2.1 System Maintenance : Information
FIELD DESCRIPTION
Name Displays the system name of your HomeSafe. This information can be changed
in Menu 1 – General Setup.
Routing Refers to the routing protocol used.
ZyNOS F/W Version Refers to the ZyNOS (ZyXEL Network Operating System) system firmware
version. ZyNOS is a registered trademark of ZyXEL Communications
Corporation.
LAN
Ethernet Address Refers to the Ethernet MAC (Media Access Control) of your HomeSafe.
IP Address This is the IP address of the HomeSafe in dotted decimal notation.
IP Mask This shows the subnet mask of the HomeSafe.
DHCP This field shows the DHCP setting (None, Relay or Server) of the HomeSafe.
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
Please enter selection:
Menu 24.2.1 - System Maintenance - Information
Name: HS-100W.zyxel.com.tw
Routing: IP
ZyNOS F/W Version: V3.60(JM.0)b1 | 05/17/2004
Country Code: 255
LAN
Ethernet Address: 00:A0:C5:01:20:05
IP Address: 192.168.1.1
IP Mask: 255.255.255.0
DHCP: Server