ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 272)

HomeSafe User’s Guide
Filter Configuration 27-9
Table 27-4 Generic Filter Rule Menu Fields
FIELD DESCRIPTION OPTIONS
Action
Not
Matched Select the action for a packet not matching the rule. Check Next
Rule
Forward
Drop
Once you have completed filling in Menu 21.4.1.1 - Generic Filter Rule, press [ENTER] at the message
“Press ENTER to Confirm” to save your configuration, or press [ESC] to cancel. This data will now be
displayed on Menu 21.1.1 - Filter Rules Summary.
27.3 Example Filter
Let’s look at an example to block outside users from accessing the HomeSafe via telnet.
Figure 27-9 Telnet Filter Example
Step 1. Enter 21 from the main menu to open Menu 21 - Filter and Firewall Setup.
Step 2. Enter 1 to open Menu 21.1 - Filter Set Configuration.
Step 3. Enter the index of the filter set you wish to configure (say 3) and press [ENTER] .
Step 4. Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 5. Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.3 -
Filter Rules Summary.