ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 123)

HomeSafe User’s Guide
8-6 WAN
Table 8-4 WAN ISP : PPTP Encapsulation
LABEL DESCRIPTION
My IP Subnet Mask Your HomeSafe will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the HomeSafe.
Server IP Address Type the IP address of the PPTP server.
Connection ID/Name Type your identification name for the PPTP server.
Apply Click Apply to save your changes back to the HomeSafe.
Reset Click Reset to begin configuring this screen afresh.
8.5 Configuring WAN IP
To change your HomeSafe’s WAN IP settings, click WAN, then the WAN IP tab. This screen
varies according to the type of encapsulation you select.
If your ISP did not assign you a fixed IP address, click Get automatically from ISP
(Default);otherwise click Use fixed IP Address and enter the IP address in the field provided.
Figure 8-5 WAN : IP
The following table describes the labels in this screen.
Table 8-5 WAN : IP
LABEL DESCRIPTION
WAN IP Address Assignment
Get automatically
from ISP Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
Use fixed IP
address Select this option If the ISP assigned a fixed IP address.