ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 58)

HomeSafe User’s Guide
Connection Wizard 3-1
Chapter 3
Connection Wizard
This chapter provides information on the Connection Wizard screens in the main menu
web configurator.
3.1 Connection Wizard Overview
The web configurator’s setup wizard helps you configure your device to access the Internet. The
second screen has three variations depending on what encapsulation type you use. Refer to your
ISP for details on what to enter in each field. Leave a field blank if you don’t have that
information.
3.2 Connection Wizard : General Setup and System Name
General Setup contains administrative and system-related information. System Name is for
identification purposes. However, because some ISPs check this name you should enter your
computer's "Computer Name".
• In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification
tab, note the entry for the Computer Name field and enter it as the System Name.
• In Windows 2000, click Start, Settings and Control Panel and then double-click System.
Click the Network Identification tab and then the Properties button. Note the entry for the
Computer name field and enter it as the System Name.
• In Windows XP, click Start, My Computer, View system information and then click the
Computer Name tab. Note the entry in the Full computer name field and enter it as the
HomeSafe System Name.
3.2.1 Domain Name
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this
blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host
name (System Name) on each individual computer, the domain name can be assigned from the
HomeSafe via DHCP.
Click Next to configure the HomeSafe for Internet access.