ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 159)

HomeSafe User’s Guide
Parental Control 12-5
Table 12-1 Parental Control
LABEL DESCRIPTION
Group Select from the drop-down list box a category of web pages that you want to have access
control over
¾ Kids
¾ Young
Teen
¾ Mature Teen
¾ Adult
These groups are used in conjunction with content filtering to decide which web pages
cannot be accessed by the user.
Edit Click Edit to proceed to a pre-defined web content categories page for the group that you
select. Refer to section 12.6 for more information.
Content
Filtering
Service The read only field Content Filtering Service Status displays Not Registered if you have not
successfully registered the HomeSafe or your registration has expired.
This field only displays whether or not you have successfully registered, not whether or not
content filtering is active. See Checking Content Filtering Activation for details on how to
check for this. Click Register Now to go to a web site where you can register for category-
based content filtering (using an external database). You can use a trial application or
register your iCard’s PIN. Refer to the web site’s on-line help for details.
)
The web site displays a registration successful
web page. It may take up to another ten minutes
for content filtering to be activated. See Checking
Content Filtering Activation on how to check the
content filtering activation.
You can manage your registration status or view content filtering reports after you register
this device.
Click Activate to begin the content filtering service now.
Username This field displays the username (up to 30 characters) for this user profile.
Group This field displays the name of the user group.
Time Left This field displays the amount of time that you have before the HomeSafe logs you out and
terminates your internet access. This time depends on the time allowance configured in
Figure 12-7. By using the + or – buttons, the administrator can increase or decrease the
time left in 15 minute increments without re-configuring the time allowances.
On-Line This field displays Yes if a user is currently on-line.
This field displays Ready if a user has a profile configured with unrestricted access and is
currently not on-line.
This field displays No if a user has a profile configured with time allowances and is currently
not on-line.
Edit Select a radio button from the list of profiles and then click Edit to configure this profile.
Delete Select a radio button from the list of profiles and then click Delete to remove this profile from
the list.
Apply Click Apply to save the settings.