ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 235)

HomeSafe User’s Guide
21-4 Internet Access
Table 21-3 New Fields in Menu 4 (PPPoE) screen
FIELD DESCRIPTION EXAMPLE
Idle Timeout This value specifies the time in seconds that elapses before the
HomeSafe automatically disconnects from the PPPoE server. 100
(default)
If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 11
and enter the PPPoE service name provided to you in the Service Name field.
21.5 Basic Setup Complete
Well done! You have successfully connected, installed and set up your HomeSafe to operate on
your network as well as access the Internet.
)
When the firewall is activated, the default policy allows all
communications to the Internet that originate from the LAN, and
blocks all traffic to the LAN that originates from the Internet.
You may deactivate the firewall in menu 21.2 or via the HomeSafe embedded web configurator.
You may also define additional firewall rules or modify existing ones but please exercise extreme
caution in doing so. See the chapters on firewall for more information on the firewall.