ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 187)

HomeSafe User’s Guide
Remote Management Screens 14-5
Figure 14-4 Remote Management : FTP
The following table describes the labels in this screen.
Table 14-3 Remote Management : FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the HomeSafe using
this service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate with the
HomeSafe using this service.
Select All to allow any computer to access the HomeSafe using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the HomeSafe using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
14.6 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging management
information between network devices. SNMP is a member of the TCP/IP protocol suite. Your
HomeSafe supports SNMP agent functionality, which allows a manager station to manage and
monitor the HomeSafe through the network. The HomeSafe supports SNMP version one
(SNMPv1) and version two (SNMPv2). The next figure illustrates an SNMP management
operation. SNMP is only available if TCP/IP is configured.