ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 280)

HomeSafe User’s Guide
SNMP Configuration 28-3
28.4 SNMP Traps
The HomeSafe will send traps to the SNMP manager when any one of the following events
occurs:
Table 28-2 SNMP Traps
TRAP # TRAP NAME DESCRIPTION
1 coldStart (defined in RFC-1215) A trap is sent after booting (power on).
2 warmStart (defined in RFC-1215) A trap is sent after booting (software reboot).
3 linkDown (defined in RFC-1215) A trap is sent with the port number when any of the links
are down. See the following table.
4 linkUp (defined in RFC-1215) A trap is sent with the port number.
5 authenticationFailure (defined in
RFC-1215)
A trap is sent to the manager when receiving any SNMP
gets or sets requirements with wrong community
(password).
6 whyReboot (defined in ZYXEL-
MIB) A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
6a For intentional reboot : A trap is sent with the message "System reboot by user!" if
reboot is done intentionally, (for example, download new
files, CI command "sys reboot", etc.).
The port number is its interface index under the interface group.
Table 28-3 Ports and Permanent Virtual Circuits
PORT PVC (PERMANENT VIRTUAL CIRCUIT)
1 Ethernet LAN
2 1
3 2
… …
13 12
14 xDSL