ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 246)

HomeSafe User’s Guide
Dial-in User Setup 24-1
Chapter 24
Dial-in User Setup
This chapter shows you how to create user accounts on the HomeSafe.
24.1 Dial-in User Setup
By storing user profiles locally, your HomeSafe is able to authenticate wireless users without
interacting with a network RADIUS server.
Follow the steps below to set up user profiles on your HomeSafe.
Step 1. From the main menu, enter 14 to display Menu 14 - Dial-in User Setup.
Figure 24-1 Menu 14- Dial-in User Setup
Step 2. Type a number and press [ENTER] to edit the user profile.
Figure 24-2 Menu 14.1- Edit Dial-in User
The following table describes the fields in this screen.
Table 24-1 Menu 14.1- Edit Dial-in User
FIELD DESCRIPTION
User Name Enter a username up to 31 alphanumeric characters long for this user profile.
This field is case sensitive.
Active Press [SPACE BAR] to select Yes and press [ENTER] to enable the user profile.
Password Enter a password up to 31 characters long for this user profile.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 14 - Dial-in User Setup
1. ________ 9. ________ 17. ________ 25. ________
2. ________ 10. ________ 18. ________ 26. ________
3. ________ 11. ________ 19. ________ 27. ________
4. ________ 12. ________ 20. ________ 28. ________
5. ________ 13. ________ 21. ________ 29. ________
6. ________ 14. ________ 22. ________ 30. ________
7. ________ 15. ________ 23. ________ 31. ________
8. ________ 16. ________ 24. ________ 32. ________
Menu 14.1 - Edit Dial-in User
User Name= test
Active= Yes
Password= ********
Press ENTER to Confirm or ESC to Cancel: