ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 186)

HomeSafe User’s Guide
14-4 Remote Management Screens
Figure 14-3 Remote Management : Telnet
The following table describes the labels in this screen.
Table 14-2 Remote Management : Telnet
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the HomeSafe using
this service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate with the
HomeSafe using this service.
Select All to allow any computer to access the HomeSafe using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the HomeSafe using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
14.5 Configuring FTP
You can upload and download the HomeSafe’s firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance for details. To use this
feature, your computer must have an FTP client.
To change your HomeSafe’s FTP settings, click REMOTE MGMT, then the FTP tab. The
screen appears as shown.