ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 200)

HomeSafe User’s Guide
15-4 Logs
Table 15-2 Log Settings
LABEL DESCRIPTION
Mail Subject Type a title that you want to be in the subject line of the log e-mail message that the
HomeSafe sends. Not all HomeSafe models have this field.
Send Log To The HomeSafe sends logs to the e-mail address specified in this field. If this field is left
blank, the HomeSafe does not send logs via e-mail.
Send Alerts To Alerts are real-time notifications that are sent as soon as an event, such as a DoS
attack, system error, or forbidden web access attempt occurs. Enter the e-mail address
where the alert messages will be sent. Alerts include system errors, attacks and
attempted access to blocked web sites. If this field is left blank, alert messages will not
be sent via e-mail.
Syslog Logging The HomeSafe sends a log to an external syslog server.
Active Click Active to enable syslog logging.
Syslog IP Address Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Log Facility Select a location from the drop down list box. The log facility allows you to log the
messages to different files in the syslog server. Refer to the syslog server manual for
more information.
Send Log
Log Schedule This drop-down menu is used to configure the frequency of log messages being sent
as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If you select Weekly or Daily, specify a time of day when the E-mail should be sent. If
you select Weekly, then also specify which day of the week the E-mail should be sent.
If you select When Log is Full, an alert is sent when the log fills up. If you select
None, no log messages are sent
Day for Sending
Log Use the drop down list box to select which day of the week to send the logs.
Time for Sending
Log Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Clear log after
sending mail Select the check box to remove any logs that are recorded in the view logs page after
they are sent by E-mail.
Log Select the categories of logs that you want to record.
Send Immediate
Alert Select log categories for which you want the HomeSafe to send e-mail alerts
immediately.
Apply Click Apply to save your changes.
Reset Click Reset to begin configuring this screen afresh.