ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 59)

HomeSafe User’s Guide
3-2 Connection Wizard
Figure 3-1 Connection Wizard : General Setup
3.3 Connection Wizard: Screen 2
Set up your wireless LAN using the second wizard screen.
Figure 3-2 Connection Wizard : Wireless LAN Setup
The following table describes the fields in this screen.
Table 3-1 Connection Wizard : Wireless LAN Setup
LABEL DESCRIPTION
ESSID Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the HomeSafe, make sure all wireless stations use the same
ESSID in order to access the network.
Choose
Channel ID To manually set the HomeSafe to use a channel, select a channel from the drop-down list
box.