ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 109)

HomeSafe User’s Guide
7-16 Wireless Security
Table 7-7 WLAN : Wireless : 802.1x and Static WEP
LABEL DESCRIPTION
Reset Click Reset to reload the previous configuration for this screen.
7.13 Configuring 802.1x
In order to configure and enable 802.1x; click the WIRELESS link under ADVANCED to
display the Wireless screen. Select 802.1x + No WEP from the Security list.
Figure 7-11 WLAN : Wireless: 802.1x
The following table describes the labels in this screen.
Table 7-8 WLAN : Wireless: 802.1x
LABEL DESCRIPTION
ReAuthentication
Timer (in
seconds) Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds. The
default time interval is 1800 seconds (30 minutes).
)
If wireless station authentication is done
using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Idle Timeout The HomeSafe automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed. The default time
interval is 3600 seconds (or 1 hour).