ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 201)

HomeSafe User’s Guide
Maintenance 16-1
Chapter 16
Maintenance
This chapter displays system information such as ZyNOS firmware, port IP addresses
and port traffic statistics.
16.1 Maintenance Overview
The maintenance screens can help you view system information, upload new firmware, manage
configuration and restart your HomeSafe.
16.2 Status Screen
Click MAINTENANCE to open the Status screen, which you can use to monitor your
HomeSafe. Note that these fields are READ-ONLY and only for diagnostic purposes.
Figure 16-1 Maintenance : Status
The following table describes the labels in this screen.
Table 16-1 Maintenance : Status
LABEL DESCRIPTION
System Name This is the System Name you chose in the first Internet Access Wizard screen. It is
for identification purposes
Model Name The model name identifies your device type. The model name should also be on a
sticker on your HomeSafe. If you are uploading firmware, be sure to upload
firmware for this exact model name. This field is not available on all models.
ZyNOS Firmware
Version This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
proprietary Network Operating System design.
Routing Protocols This shows the routing protocol - IP for which the HomeSafe is configured. This field
is not configurable in all HomeSafe router models.
WAN Port
IP Address This is the WAN port IP address.