ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 67)

HomeSafe User’s Guide
3-10 Connection Wizard
Table 3-8 Example of Network Properties for LAN Servers with Fixed IP Addresses
Choose an IP address 192.168.1.2-192.168.1.32; 192.168.1.65-192.168.1.254.
Subnet mask 255.255.255.0
Gateway (or default route) 192.168.1.1(HomeSafe LAN IP)
The fifth wizard screen varies according to the type of encapsulation that you select in the third
wizard screen.
Figure 3-8 Connection Wizard : WAN Setup
The following table describes the fields in this screen.
Table 3-9 Connection Wizard : WAN Setup
LABEL DESCRIPTION
WAN IP Address Assignment
Get automatically from
ISP
Select this option If your ISP did not assign you a fixed IP address. This is the
default selection.
Use fixed IP address Select this option If the ISP assigned a fixed IP address.
My WAN IP Address Enter your WAN IP address in this field if you selected Use Fixed IP Address.
Remote IP Address Enter the Remote IP Address (if your ISP gave you one) in this field.
Remote IP Subnet
Mask
Type your network's IP Subnet Mask.
DNS Server Address Assignment (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
computer before you can access it. The HomeSafe uses a system DNS server (in the order you specify
here) to resolve domain names for VPN, DDNS and the time server.