ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 191)

HomeSafe User’s Guide
Remote Management Screens 14-9
Table 14-5 Remote Management : SNMP
LABEL DESCRIPTION
Service Access Select the interface(s) through which a computer may access the HomeSafe using
this service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate with the
HomeSafe using this service.
Select All to allow any computer to access the HomeSafe using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the HomeSafe using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
14.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your HomeSafe’s DNS settings, click REMOTE MGMT, then the DNS tab. The
screen appears as shown.
Figure 14-7 Remote Management : DNS
The following table describes the labels in this screen.
Table 14-6 Remote Management : DNS
LABEL DESCRIPTION
Server Port The DNS service port number is 53 and cannot be changed here.
Server Access Select the interface(s) through which a computer may send DNS queries to the
HomeSafe.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to send DNS queries to the
HomeSafe.
Select All to allow any computer to send DNS queries to the HomeSafe.
Choose Selected to just allow the computer with the IP address that you specify to
send DNS queries to the HomeSafe.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.