ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 312)

HomeSafe User’s Guide
Call Scheduling 34-3
Table 34-1 Menu 26.1 Schedule Set Setup
FIELD DESCRIPTION EXAMPLE
Action Forced On means that the connection is maintained whether or not there
is a demand call on the line and will persist for the time period specified in
the Duration field.
Forced Down means that the connection is blocked whether or not there
is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call
on the line. Disable Dial-On-Demand means that this schedule prevents
a demand call on the line.
Forced On
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Once your schedule sets are configured, you must then apply them to the desired remote node(s).
Enter 11 from the Main Menu and then enter the target remote node index. Using [SPACE
BAR], select PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make
the schedule sets field available as shown next.
Figure 34-3 Applying Schedule Set(s) to a Remote Node (PPPoE)
You can apply up to four schedule sets, separated by commas, for one remote node. Change the
schedule set numbers to your preference(s).
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes
Encapsulation= PPPoE Edit IP= No
Service Type= Standard Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login= Schedules= 1,2,3,4
My Password= ******** Nailed-Up Connection= No
Retype to Confirm= ********
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel:
Apply your
schedule sets
here