ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 75)

HomeSafe User’s Guide
4-4 System Screens
Table 4-2 SYSTEM : DDNS
LABEL DESCRIPTION
Apply Click Apply to save your changes back to the HomeSafe.
Reset Click Reset to begin configuring this screen afresh.
4.5 Configuring Password
To change your HomeSafe’s password (recommended), click SYSTEM, then the Password tab.
The screen appears as shown. This screen allows you to change the HomeSafe’s password.
Figure 4-3 SYSTEM : Password
The following table describes the labels in this screen.
Table 4-3 SYSTEM : Password
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system
in this field.
New Password Type the new password in this field.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the HomeSafe.
Reset Click Reset to begin configuring this screen afresh.
4.6 Configuring Time Setting
To change your HomeSafe’s time and date, click SYSTEM, then the Time Setting tab. The
screen appears as shown. Use this screen to configure the HomeSafe’s time based on your local
time zone.