5 step 3 : internet configuration setup – ZyXEL Communications Parental Control Gateway HS100/HS100W User Manual
Page 38

HomeSafe User’s Guide
Introducing the Web Configurator
2-5
)
The wireless stations and HomeSafe must use the same
ESSID, channel ID and Pre-Shared Key for wireless
communication.
Figure 2-5 Wizard Step 2 : Wireless LAN Setup Extend Security
The following table describes the labels in this screen.
Table 2-4 Wizard Step 2 : Wireless LAN Setup Extend Security
LABEL
DESCRIPTION
Pre-Shared
Key
Type from 8 to 63 case-sensitive ASCII characters.
Back
Click Back to display the previous screen.
Next
Click Next to proceed to the next screen.
Refer to the chapter on wireless LAN for more information.
2.5 Step 3 : Internet Configuration Setup
By implementing PPPoE directly on the HomeSafe (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the HomeSafe does that part
of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access.
Figure 2-6 Wizard Step 3 : Internet Access Setup
The following table describes the labels in this screen.