ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 53)

HomeSafe User’s Guide
2-20 Introducing the Web Configurator
If you want to configure more of your HomeSafe features, proceed with the rest of this User’s
Guide.
2.9 Accessing the HomeSafe Web Configurator
)
You have to open a new browser and enter the device IP
address to log in again.
1. Launch your web browser.
2. Type "192.168.1.1" as the URL.
3. Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
Figure 2-25 Password Screen
4. You should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) and click Apply or click
Ignore. Refer to Figure 2-14 if you have already configured your user password.
Figure 2-26 Change Password Screen