ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 308)

HomeSafe User’s Guide
Remote Management 33-1
Chapter 33
Remote Management
This chapter covers remote management (SMT menu 24.11).
33.1 Remote Management
Remote management allows you to determine which services/protocols can access which
HomeSafe interface (if any) from which computers.
You may manage your HomeSafe from a remote location via:
¾ Internet (WAN
only)
¾ ALL (LAN and WAN)
¾ LAN only ¾ Neither (Disable).
)
When you Choose WAN only or ALL (LAN & WAN), you still need
to configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server Access
field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.
Figure 33-1 Menu 24.11 – Remote Management Control
The following table describes the fields in this screen.
Table 33-1 Menu 24.11 – Remote Management Control
FIELD DESCRIPTION EXAMPLE
Telnet Server
FTP Server
Web Server
SNMP Service
DNS Service Each of these read-only labels denotes a service or protocol.
Menu 24.11 - Remote Management Control
TELNET Server: Port = 23 Access = LAN only
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN only
Secure Client IP = 0.0.0.0
Web Server: Port = 80 Access = LAN only
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = LAN only
Secure Client IP = 0.0.0.0
DNS Service: Port = 53 Access = LAN only
Secure Client IP = 0.0.0.0