ZyXEL Communications Parental Control Gateway HS100/HS100W - Manual (Page 185)

HomeSafe User’s Guide
Remote Management Screens 14-3
Table 14-1 Remote Management : WWW
LABEL DESCRIPTION
Server Access Select the interface(s) through which a computer may access the HomeSafe using
this service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate with the
HomeSafe using this service.
Select All to allow any computer to access the HomeSafe using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the HomeSafe using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
14.3 Configuring Telnet
You can configure your HomeSafe for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the HomeSafe.
Figure 14-2 Telnet Configuration on a TCP/IP Network
14.4 Configuring TELNET
Click REMOTE MGMT and the TELNET tab to display the screen as shown.